$1,853.00 BHP-150
[BHP-150]

"Input:
230VAC, Three Phase
Output:
240VDC Armature
150VDC Field
15 HP
See Options for FHP, RHP"

< Image >View large image

Dimensions
View large image

Wiring
View large image

1.0	Motor/Load Type	DC Motor
2.0	Rating
2.1	Horsepower	15
2.2	Armature	0 ~ 240 VDC
2.3	Field	150/240 VDC
3.0	Rated Input
3.1	Input Voltage	200 - 240VAC ±10%
3.2	Phase	3
3.3	Frequency	50/60 ±5%
4.0	Rated Output
4.1	Voltage	"Arm: 180VDC, Fld: 200VDC"
5.0	Overload Capacity	150% for one minute
6.0	Instantaneous Overcurrent Trip	Preset for 260% of rated current
7.0	Acceleration / Deceleration	0.6 ~ 28 sec.
8.0	Torque (Current) Limit	0 ~ 200% of rating
9.0	Minimum Speed	0 ~ 10% of output voltage
10.0	Maximum Speed	75 ~ 105% of output voltage
11.0	IR Compensation	0 ~ 10% boost
12.0	Speed Regulation
12.1	Armature Feedback	±1.0%
12.2	Tachometer Feedback	±0.1%
13.0	Speed Command Input	4 ~ 20 mA or 0 ~ 6 VDC
14.0	Tachometer Feedback Input	50VDC per 1000 RPM standard
15.0	Control Method	"Full Wave, Six SCR"
16.0	Mechanical Properties
16.1	Height	14 inches (356mm)
16.2	Width	14 inches (356mm)
16.3	Depth	5.7 inches (145mm)
16.4	Weight (lbs)	20
17.0	Options	DC Loop Contactor (FHP) - $80 Bi-Directional (RHP) - $640 External Signal Follower (SF) - $108 Armature Voltage Follower (VF1) - $87 Tachmeter Follower (TF) - $87 Field Loss Protection (FL) - $108 Dynamic Braking (D) - $170 NEMA 12 Enclosure - $603