| 1.0 |
Motor/Load Type |
AC Motor
|
| 2.0 |
Rating |
|
| 2.1 |
Horsepower |
20
|
| 2.2 |
Motor (kW) |
15
|
| 2.3 |
Capacity (kVA) |
22.9
|
| 2.4 |
Output Current (Amps) |
60
|
| 3.0 |
Rated Input |
|
| 3.1 |
Input Voltage |
200 - 230VAC
|
| 3.2 |
Phase |
1
|
| 3.3 |
Frequency |
50/60
|
| 4.0 |
Rated Output |
|
| 4.1 |
Voltage |
200 - 240VAC
|
| 4.2 |
Phase |
3
|
| 4.3 |
Frequency |
0.1 - 600 Hz
|
| 5.0 |
Control Method |
Sine-Wave (PWM) control
|
| 6.0 |
Frequency Range |
0.1 - 600 Hz
|
| 7.0 |
Frequency Accuracy |
|
| 7.1 |
Digital Command |
0.01% of the max. frequency
|
| 7.2 |
Analog Command |
0.2% of the max. frequency
|
| 8.0 |
Frequency Setting Resolution |
|
| 8.1 |
Digital |
0.1 Hz
|
| 8.2 |
Analog |
Max. Freq./100
|
| 9.0 |
Volt./Freq. Characteristics |
Adjustable V/F curve using 4 independent points.
|
| 10.0 |
Overload Current Rating |
150%, 60 seconds
|
| 11.0 |
Acceleration/Deceleration Time |
0.1 ~ 6000 sec. (2 independent settings for Accel/Decel Time)
|
| 12.0 |
Braking |
|
| 12.1 |
DC Braking |
DC Braking Current Level: 0 to 125% of rated output current. DC Braking time: 0 to 60 seconds. Start-Point for DC Braking: 0.1-600Hz both when start up and stop.
|
| 13.0 |
Input Signal |
|
| 13.1 |
Frequency Setting |
|
| 13.1.1 |
Digital Operator Panel |
By a rotary encoder (setting resolution 0.01Hz/step)
|
| 13.1.2 |
External Signal |
0 ~ +10VDC((Input impedance 20k?), -10 ~ +10VDC((Input impedance 10k?),4 ~20mA dc ((Input impedance 250?),Multi-Function Inputs 1 ~ 6 (15 Steps Jog, up/down), PLC run, RS-485 Interface MODBUS protocol
|
| 13.2 |
Forward/Reverse/Start/Stop |
|
| 13.2.1 |
Digital Operator Panel |
Set by RUN, STOP and JOG
|
| 14.0 |
Other Functions |
PID feedback control, automatic voltage regulation, Momentary Power Loss restart, S-Curve, External Fault, Fault Reset, Auto Restart, Fault Records, Prevention, Frequency Limits,Fan & Pump Control, Parameter Lock/Reset, Auto Tuning, Reverse Inhibition, Over-Voltage/ Over-Current Stall Prevention, automatic energy-saving, DC Braking, Speed Search during Start-up, PLC, MODBUS Communication,
|
| 15.0 |
Protective Function |
Self-testing, AC source Over Voltage, Over Voltage, Over Current, Under Voltage, Over Load, Overheating, External Fault, Electronic thermal, Ground Fault, Stall Prevention, Output short circuit, IGBT short circuit
|
| 16.0 |
Environmental Conditions |
|
| 16.1 |
Operating Temp. |
Ambient: -10? ~ +40?(Non-Condensing and not frozen).Storage: -20? ~ +60?
|
| 16.2 |
Humidity |
Below 90?RH (Non-Condensing)
|
| 16.3 |
Vibration |
Below 20Hz: 1G, above 20Hz: 0.6G
|
| 16.4 |
Location |
Less than 1000 m of altitude or less, indoors (no corrosive gases or dust)
|
| 17.0 |
Mechanical Properties |
|
| 17.1 |
Color |
Black
|
| 17.2 |
Height |
18.5 inches (470mm)
|
| 17.3 |
Width |
16.1 inches (410mm)
|
| 17.4 |
Depth |
11.3 inches (287mm)
|
| 17.5 |
Weight (lbs) |
48.6
|
| 18.0 |
Options |
Dynamic braking unit Braking resistor AC reactor
|
(for orders received online) 
